Article ID | Journal | Published Year | Pages | File Type |
---|---|---|---|---|
158830 | Chemical Engineering Science | 2007 | 5 Pages |
The activity and selectivity of Co-ZSM-5 and Co-BEA coatings (Si/Al=15Si/Al=15–23) with a thickness of 1μm deposited on a Mo substrate were determined in the ammoxidation of ethylene in a microreactor. Zeolite Beta coatings were more than twice as selective towards the acetonitrile formation than ZSM-5 coatings. The rate of acetonitrile formation increased by a factor of 6 by increasing the aluminum content in the coatings from a Si/Al ratio of 23 to 15. The effect of the Co/Al ratio was less pronounced. The addition of small amounts of boron decreased the selectivity to acetonitrile in the whole range of Si/Al ratios studied. A maximum TOF of 0.8s-1 was obtained at a reaction temperature of 500 °C, with a selectivity of 58% to acetonitrile. The optimized zeolitic coatings show higher reaction rates than a pelletized Co-ZSM-5 catalyst.