Article ID | Journal | Published Year | Pages | File Type |
---|---|---|---|---|
1599768 | Intermetallics | 2015 | 9 Pages |
Abstract
The crystallization behavior of Zr55Cu30Al10Ni5 bulk amorphous alloy during laser solid forming (LSF) was analyzed. Since laser surface remelting (LSM) is a key process for the LSF, the crystallization behavior of as-cast Zr55Cu30Al10Ni5 bulk metallic glasses (BMGs) during LSM was also investigated. It was found that the amorphous state of the as-cast BMGs was maintained when they were repeatedly remelted four times in a single-trace LSM, and as for the LSF of Zr55Cu30Al10Ni5 bulk amorphous alloy, the crystallization primarily occurred in the HAZ between the adjacent traces and layers after the two layers were deposited. The as-deposited microstructure exhibited a series of phase evolutions from the molten pool to the HAZ as follows: the amorphous â NiZr2-type nanocrystal + amorphous â NiZr2-type equiaxed dendrite + amorphous â Cu10Zr7-type dendrite + NiZr2-type nanocrystal. Among these microstructural patterns, the NiZr2-type nanocrystals and equiaxed dendrites primarily formed from the rapid solidification of the remelted liquid in the laser processing process, and the Cu10Zr7-type dendrites in the HAZ primarily formed by the crystallization of pre-existed nuclei in the already-deposited amorphous substrate.
Keywords
Related Topics
Physical Sciences and Engineering
Materials Science
Metals and Alloys
Authors
Yuanyuan Zhang, Xin Lin, Lilin Wang, Lei Wei, Fenggang Liu, Weidong Huang,