Article ID | Journal | Published Year | Pages | File Type |
---|---|---|---|---|
1601875 | Intermetallics | 2007 | 5 Pages |
An in situ bulk Zr58Al9Ni9Cu14Nb10 quasicrystal-glass composite has been fabricated by means of copper mould casting. The microstructure and constituent phases of the alloy composite have been analyzed by using X-ray diffraction, transmission electron microscopy and high-resolution transmission electron microscopy. Icosahedral quasicrystals were found to be the majority phase and the grain size is in half-μm scale. In between the I-phase grains is a glassy phase. Optical microscopy and scanning electron microscopy revealed that the as-cast alloys were pore-free. The microhardness of the composite is about 5.90 ± 0.30 GPa. The room temperature compression stress–true strain curve exhibits a 2% elastic deformation up to failure, and a maximum fracture stress of 1850 MPa at a quasi-static loading rate of 4.4 × 10−4 s−1. The mechanical property is superior to the early developed quasicrystal alloys, and is comparable to Zr-based bulk metallic glasses and their nanocomposites. The quasicrystal-glass composite exhibits basically a brittle fracture mode at room temperature.