| Article ID | Journal | Published Year | Pages | File Type |
|---|---|---|---|---|
| 1618994 | Journal of Alloys and Compounds | 2011 | 5 Pages |
Mesoporous magnetite (Fe3O4) was successfully synthesized on a large scale by direct pyrolysis of ferric nitrate-EG (EG = ethylene glycol) gel in a one-end closed horizontal tube furnace in the air without using any template, additions, and carrier gas. The as-synthesized mesoporous Fe3O4 were characterized by powder X-ray diffraction (XRD), infrared spectra (IR), transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM), selected area electron diffraction (SAED), Brunauer–Emmett–Teller (BET), Barrett–Joyner–Halenda (BJH), and thermal gravimetric analysis (TGA). Results from TEM showed that the as-obtained Fe3O4 has mesoporous structure formed by the loose agglomeration of nanoparticles with diameter of about 6 nm, which was also confirmed by small-angle XRD and nitrogen adsorption analysis. Furthermore, vibrating sample magnetometer (VSM) measurements indicated that the saturated magnetization of the as-obtained mesoporous Fe3O4 was ferromagnetic with the saturation magnetization (Ms) and coercivity (Hc) of 46 emu/g and 136 Oe, respectively. In addition, a possible growth mechanism of mesoporous Fe3O4 was also discussed.
Graphical abstractFigure optionsDownload full-size imageDownload as PowerPoint slideResearch highlights▶ Mesoporous magnetite (Fe3O4) was successfully synthesized by direct pyrolysis of ferric nitrate-EG (EG = ethylene glycol) gel in a horizontal tube furnace in the air. ▶ The as-prepared mesoporous Fe3O4 was formed by the loose agglomeration of nanoparticles with diameter of about 6 nm. ▶ Mesoporous Fe3O4 with the BET surface area and total pore volume of 145 m2/g and 0.12 cm3/g were obtained at 400 °C for 12 h.
