Article ID Journal Published Year Pages File Type
1621507 Journal of Alloys and Compounds 2009 5 Pages PDF
Abstract

In this work, GaN films were grown on three-inch silicon substrates by plasma-assisted molecular beam epitaxy (PAMBE) with AlN (about 200 nm) as the buffer layer. Finally, a thin AlN cap layer (50 nm) was grown on the GaN surface. Current–voltage (I–V) measurements before and after heat treatment were carried out. Different annealing temperatures (500–700 °C) were investigated. Under dark condition, the Schottky barrier height (SBH) derived by the I–V method is 0.48 eV for as-deposited Ni/AlN/GaN/AlN Schottky diode. On the other hand, the effective barrier heights of 0.52, 0.55, and 0.57 eV were obtained for Schottky diodes annealed at 500, 600, and 700 °C, respectively. We found that the SBHs of annealed Schottky diodes under dark and illuminated conditions were observed to be higher relative to the as-deposited Schottky diode. When annealed at 700 °C, the resulting Schottky diodes show a dark current of as low as 5.05 × 10−5 A at 10 V bias, which is about two orders of magnitude lower than that of as-deposited Ni/AlN/GaN/AlN Schottky diode (2.37 × 10−3 A at 10 V bias). When the sample was under illumination condition, the change of current was significant for the annealed samples as compared to the as-deposited sample.

Related Topics
Physical Sciences and Engineering Materials Science Metals and Alloys
Authors
, , , ,