Microstructural and mechanical properties of friction stir welded aluminum/copper lap joints

This paper focuses on the microstructural and mechanical properties of the friction stir welding (FSW) of 1060 aluminum alloy to a commercially pure copper. A number of FSW experiments were carried out to obtain the optimum mechanical properties by adjusting the rotational speed and welding speed in the range of 750–1500 rpm and 30–375 mm/min, respectively. Various microstructures with different morphologies and properties were observed in the stir zone. The results indicated that Al4Cu9, AlCu and Al2Cu are the main intermetallic compounds formed in the interfacial region. The effect of formation of hard and brittle intermetallic phase at the interface of the joints on the shear strength of the joint is discussed.