Compression After Impact and Fatigue of Reconsolidated Fiber-reinforced Thermoplastic Matrix Solid Composite Laminate

Carbon fiber-reinforced poly-phenylene sulfide laminate coupons were impacted at low-energy in a drop-tower machine and subsequently fatigued in a four-point bending fixture. The doubly damaged test pieces were then hot-press reconsolidated and inspected nondestructively by vibrothermography to check their structural integrity. The residual mechanical properties of the laminate in both the as-damaged and as-repaired conditions were determined by compression loading with the in-plane strain fields determined via a digital image correlation system. Cross-section views of damaged and repaired samples were analyzed by light optical microscopy and correlated to residual mechanical properties, as were the digital image correlation and nondestructive test results. Based on the values of stiffness and ultimate strength of the repaired laminates, 10 J was inferred as the maximum impact energy at which it is worthwhile performing hot-press reconsolidation, in view of the applied fatigue history following impact.