Article ID Journal Published Year Pages File Type
1637308 Transactions of Nonferrous Metals Society of China 2012 5 Pages PDF
Abstract
To further enhance shape memory effect (SME) and improve treatment technique in Fe-based shape memory alloys, an Fe17Mn5Si8Cr5Ni0.5NbC alloy was subjected to electropulsing treatment after pre-deformation. The results show that the shape recovery ratio increases with the amount of pre-deformation up to 10%. The maximum shape recovery ratio after electropulsing treatment is 8% greater than that after ageing at 1073 K. The number of NbC particles induced by electropulsing treatment is increased and the size of the particles is decreased with the amount of tensile pre-deformation up to 10%, and NbC carbides are precipitated more quickly through electropulsing treatment than by ageing.
Related Topics
Physical Sciences and Engineering Materials Science Metals and Alloys
Authors
, , , , ,