Fatigue crack growth mechanism in cast hybrid metal matrix composite reinforced with SiC particles and Al2O3 whiskers

The fatigue crack growth (FCG) mechanism of a cast hybrid metal matrix composite (MMC) reinforced with SiC particles and Al2O3 whiskers was investigated. For comparison, the FCG mechanisms of a cast MMC with Al2O3 whiskers and a cast Al alloy were also investigated. The results show that the FCG mechanism is observed in the near-threshold and stable-crack-growth regions. The hybrid MMC shows a higher threshold stress intensity factor range, ΔKth, than the MMC with Al2O3 and Al alloy, indicating better resistance to crack growth in a lower stress intensity factor range, ΔK. In the near-threshold region with decreasing ΔK, the two composite materials exhibit similar FCG mechanism that is dominated by debonding of the reinforcement-matrix interface, and followed by void nucleation and coalescence in the Al matrix. At higher ΔK in the stable- or mid-crack-growth region, in addition to the debonding of the particle-matrix and whisker-matrix interface caused by cycle-by-cycle crack growth at the interface, the FCG is affected predominantly by striation formation in the Al matrix. Moreover, void nucleation and coalescence in the Al matrix and transgranular fracture of SiC particles and Al2O3 whiskers at high ΔK are also observed as the local unstable fracture mechanisms. However, the FCG of the monolithic Al alloy is dominated by void nucleation and coalescence at lower ΔK, whereas the FCG at higher ΔK is controlled mainly by striation formation in the Al grains, and followed by void nucleation and coalescence in the Si clusters.