Article ID Journal Published Year Pages File Type
1638296 Transactions of Nonferrous Metals Society of China 2012 7 Pages PDF
Abstract
The dynamic recrystallization (DRX) behavior of Ti-6Al-2Zr-1Mo-1V alloy was investigated at deformation temperature of 1000-1100 °C and strain rate of 10−3 −1.0 s−1 by using compression test. The results show that discontinuous dynamic recrystallization (DDRX) is the predominant recrystallization mechanism at temperature higher than 1050 °C and strain rate lower than 0.01 s−1. Meanwhile, continuous dynamic recrystallization is the main mechanism observed at temperature below 1050 °C and strain rate above 0.01 s−1, mixed with a few DDRX grains. In addition, decreasing strain rate and increasing deformation temperature are found to facilitate the progress of DRX and refinement of grains in the Ti alloy in β forging process.
Related Topics
Physical Sciences and Engineering Materials Science Metals and Alloys
Authors
, , ,