Detection of stacking orientation error of CFRP composite laminates using ultrasound waves

A jig was developed for generating a shear wave. A pyramid with an isosceles triangle with two 45° was made of aluminum to generate shear waves using two longitudinal transducers based on ultrasonic-polarized mechanism. Also, the signal splitter was connected to the pulser jack on the pulser/receiver and to the longitudinal transducers. Therefore, an experimental way was performed in order to make shear wave on the bottom of aluminum alloyed pyramid. Also, a jig was manufactured and developed for generating a shear wave based on the computer numerical simulation. It is found that the experimentally shear wave variation of newly-designed jig is consistent with computer numerical simulation results and shear wave ultrasonic application can be very useful to detect the defects in CFRP composites.