Simultaneous synthesis by spark plasma sintering of a thermal barrier coating system with a NiCrAlY bond coat

As-fabricated thermal barrier coating (TBC) systems generally consist of a superalloy substrate, a MCrAlY bond coat (M = Ni, Co, Fe), and a ceramic (usually partially stabilized zirconia) top coat. The conventional methods for producing the two coating layers generally derive from thermal spray and physical vapor deposition techniques. Thermal exposure leads to the formation of an additional layer: the thermally grown oxide (TGO) between the bond coat and top coat. In the present work, a TBC system is synthesized through the application of spark plasma sintering (SPS), which provides not only the opportunity to synthesize all three layers at once, but the process is quite rapid and can produce dense layers. More specifically, this paper describes the application of this method to an yttria-stabilized ZrO2 (YSZ) top coat and a NiCrAlY bond coat on a Ni-base Hastelloy X substrate. A one-micron thick Al2O3 TGO layer is also created from the reaction between an Al foil layer inserted in the stack prior to sintering and the ZrO2 in the top coat. The effects of select process conditions are considered. The resulting multi-layer system is characterized with optical microscopy, scanning electron microscopy (SEM), high-resolution transmission electron microscopy (HR-TEM), energy dispersive X-ray analysis (EDAX) and X-ray diffraction (XRD). Differential thermal analysis (DTA) is used to investigate the reaction between the Al foil and the YSZ top coat.