Article ID Journal Published Year Pages File Type
1660456 Surface and Coatings Technology 2009 8 Pages PDF
Abstract

Amorphous coatings with a composition of Fe48Cr15Mo14C15B6Y2 were prepared by means of high velocity oxygen fuel (HVOF) thermal spraying under different conditions. Microstructural studies show that the coatings present dense layered structure and low porosity with a fraction of nanocrystals precipitated. The porosity and amorphous fraction of the coatings decrease as the kerosene and oxygen flow increase within the parameter range examined. Corrosion behavior of the amorphous coatings was investigated by electrochemical measurement. The results show that the coatings are spontaneously passivated with wide passive region and low passive current density in 3.5% NaCl, 1 N HCl and 1 N H2SO4 solutions, and exhibit an excellent ability to resist localized corrosion. However, the corrosion resistance of the coatings decreases in 1 N NaOH solution with lower transpassive potential and passive region. In addition, the optimal spraying parameter improves the corrosion resistance of the amorphous coatings obviously due to the proper proportion of porosity and amorphous fraction.

Related Topics
Physical Sciences and Engineering Materials Science Nanotechnology
Authors
, , , , , ,