| Article ID | Journal | Published Year | Pages | File Type |
|---|---|---|---|---|
| 1663247 | Surface and Coatings Technology | 2006 | 7 Pages |
CrN monolayer coating and CrN/WN multilayer coatings were deposited on the silicon (100) substrate by ion-beam assisted deposition process. The bilayer period of these coatings was controlled at 8 nm and 30 nm. The cross-sectional morphology of nanoscaled multilayer coatings was characterized by scanning electron microscopy and transmission electron microscopy. The wear resistance of CrN/WN multilayer coatings and CrN monolayer coating was investigated using a pin-on-disc tribometer. The surface roughness (Ra) of the coatings was evaluated by atomic force microscopy, and that of CrN and WN monolayer coating was 6.7 and 5.9 nm, respectively. The employment of multilayer configuration in CrN/WN coating with bilayer period of 8 nm and 30 nm effectively reduced the surface roughness down to 1.9 and 2.2 nm, respectively. The friction coefficient of CrN monolayer coating and CrN/WN multilayer film with a bilayer period of 30 nm was 0.63 and 0.31, respectively. Owing to the high hardness/elastic modulus ratio, as well as the dense structure and the smooth surface roughness, the CrN/WN multilayer coatings exhibited better wear resistance in the consideration of friction coefficient and the worn surface morphology.
