Article ID Journal Published Year Pages File Type
166421 Combustion and Flame 2014 14 Pages PDF
Abstract

Gasoline Compression Ignition (GCI) engines have the potential to achieve high fuel efficiency and to significantly reduce both NOx and particulate matter (PM) emissions by operating under dilute, partially-premixed conditions. This low temperature combustion strategy is dependent upon direct-injection of gasoline during the compression stroke and potentially near top dead center (TDC). The timing and duration of the in-cylinder injections can be tailored based on speed and load to create optimized conditions that result in a stable combustion.We present the results of advanced aerosol analysis methods that have been used for detailed real-time characterization of PM emitted from a single-cylinder GCI engine operated at different speed, load, timing, and number and duration of near-TDC fuel injections. PM characterization included measurements of size and composition of individual particles sampled directly from the exhaust and after mass and/or mobility classification. We use these data to calculate particle effective density, fractal dimension, dynamic shape factors in free-molecular and transition flow regimes, average diameter of primary spherules, number of spherules, and void fraction of soot agglomerates.The data indicate that the properties of GCI particulates varied markedly depending upon engine load. Under low-load conditions (5.5 bar net Indicated Mean Effective Pressure, IMEP), PM is comprised of a mixture of particles ∼70% of which are compact organic particles and ∼30% are fractal soot aggregates. The soot aggregates have fractal dimension of 2.11, are constructed of primary spherules with average diameter of 40 nm, and composed of elemental and organic carbon at ∼55:43 ratio by weight. Under high-load conditions (14 bar net IMEP), all the particles are fractal soot agglomerates with nearly identical fractal dimension and composition, but constructed of primary spherules with average diameter of 26 nm.

Related Topics
Physical Sciences and Engineering Chemical Engineering Chemical Engineering (General)
Authors
, , , , , , , , , , , ,