Solid phase epitaxy of silicon thin films by diode laser irradiation for photovoltaic applications

High temperature solid phase epitaxial crystallization of amorphous silicon layers prepared by electron beam evaporation is investigated. By using a continuous wave diode laser for heating the films rapidly (in milliseconds to seconds) this method is suitable on glass substrates with low temperature resistance. Therefore, the method is an economically advantageous technique of producing absorber layers for thin film solar cells. For the experiments 500 nm of amorphous silicon was deposited on two different configurations of substrates. In the first one monocrystalline wafers of three different crystallographic orientations were used. In the second one a polycrystalline seed layer prepared on borosilicate glass served as substrate. The crystallization process was monitored in situ by time resolved reflectivity measurements. Depending on the crystal orientation 2 s to 3 s was needed for complete solid phase epitaxial crystallization of the amorphous films. The evolution of temperature during crystallization was simulated numerically.

► High temperature epitaxial crystallization of silicon ► Amorphous Si prepared by electron beam evaporation on multicrystalline seed layers ► Rapid heating by using a diode laser ► Numerical simulation of temperature evolution ► In situ monitoring by time resolved reflectivity