Article ID | Journal | Published Year | Pages | File Type |
---|---|---|---|---|
1667983 | Thin Solid Films | 2011 | 9 Pages |
Abstract
One of the most promising areas for the industrial application of atomic layer deposition (ALD) is for gas barrier layers on polymers. In this work, a packaging material system with improved diffusion barrier properties has been developed and studied by applying ALD on flexible polymer based packaging materials. Nanometer scale metal oxide films have been applied to polymer-coated papers and their diffusion barrier properties have been studied by means of water vapor and oxygen transmission rates. The materials for the study were constructed in two stages: the paper was firstly extrusion coated with polymer film, which was then followed by the ALD deposition of oxide layer. The polymers used as extrusion coatings were polypropylene, low and high density polyethylene, polylactide and polyethylene terephthalate. Water vapor transmission rates (WVTRs) were measured according to method SCAN-P 22:68 and oxygen transmission rates (O2TRs) according to a standard ASTM D 3985. According to the results a 10Â nm oxide layer already decreased the oxygen transmission by a factor of 10 compared to uncoated material. WVTR with 40Â nm ALD layer was better than the level currently required for most common dry flexible packaging applications. When the oxide layer thickness was increased to 100Â nm and above, the measured WVTRs were limited by the measurement set up. Using an ALD layer allowed the polymer thickness on flexible packaging materials to be reduced. Once the ALD layer was 40Â nm thick, WVTRs and O2TRs were no longer dependent on polymer layer thickness. Thus, nanometer scale ALD oxide layers have shown their feasibility as high quality diffusion barriers on flexible packaging materials.
Related Topics
Physical Sciences and Engineering
Materials Science
Nanotechnology
Authors
Tommi O. Kääriäinen, Philipp Maydannik, David C. Cameron, Kimmo Lahtinen, Petri Johansson, Jurkka Kuusipalo,