Article ID | Journal | Published Year | Pages | File Type |
---|---|---|---|---|
1668470 | Thin Solid Films | 2011 | 4 Pages |
Boron-doped or phosphorus-doped β-FeSi2 thin films have been prepared on silicon substrate by magnetron sputtering. Effects of Si/Fe ratio on the boron and phosphorus doping efficiencies have been studied from the resistivities of doped β-FeSi2 thin films and current–voltage characteristics of doped β-FeSi2/Si heterojunctions. The experimental results reveal that the carrier concentration and doping efficiency of boron or phosphorus dopants at the Fe-rich side are higher than that at the Si-rich side. The effect of Si/Fe ratio can be deduced from the comparison of the formation energies under two extreme conditions. At the Fe-rich limit condition, the formation energy of boron or phosphorous doping is lower than that at the Si-rich condition. Therefore, the activation of impurities is more effective at the Fe-rich side. These results demonstrate that the boron-doped and phosphorous-doped β-FeSi2 thin films should be kept at the Fe-rich side to avoid the unexpected doping sites and low doping efficiency.