Article ID Journal Published Year Pages File Type
1671852 Thin Solid Films 2009 4 Pages PDF
Abstract

Cu2O–Ag thin films were co-deposited by reactive sputtering on glass substrates. During deposition, Ag contents and deposited temperatures were varied. After deposition, a UV–VIS–NIR photometer and a Hall measurement system were used to characterize the optical and electrical properties of these films. The results showed that the Cu2O–Ag thin films had a decreased optical transmittance with the increase of Ag contents. The resistivity was also decreased, which is most likely due to the formation of Ag phase. Through the measurement of photo-induced conductivity, it was found that, when Ag concentration was at 4 at.%, the film had the highest increase in conductivity under light irradiation. This is due to the co-existence of Ag2O and Cu2O. However, when deposited at a temperature higher than room temperature, the photo-induced conductivity of this film became less obvious, apparently due to the dissociation of Ag2O. The results of Photoluminescence (PL) measurement confirmed that the Cu2O–Ag(4 at.%) sample might produce more electron–hole pairs than other samples, which caused the increase of conductivity.

Related Topics
Physical Sciences and Engineering Materials Science Nanotechnology
Authors
, , , ,