Superhydrophilic textured-surfaces on stainless steel substrates

Aluminum-induced crystallization (AIC) of amorphous silicon (a-Si) is used to produce micro/nano-textured surfaces on stainless steel substrates at low temperatures for altering the wetting property of the substrates. The micro/nano-textured surfaces were characterized using scanning electron microscopy, X-ray spectroscopy, and X-ray diffraction. The wetting properties of the textured surfaces were characterized by water contact angle measurements. It was found that AIC of a-Si changes the apparent contact angles of stainless steel substrates from 90° to about 0°, measured 0.5 s after a water droplet drops on the surfaces. The study also shows that a superhydrophilic textured surface can be converted to a highly hydrophobic surface with an apparent contact angle of 145° by coating the surface with a layer of octadecyltrichlorosilane.