Article ID | Journal | Published Year | Pages | File Type |
---|---|---|---|---|
1678223 | Ultramicroscopy | 2010 | 8 Pages |
Abstract
The acquisition rate of all scanning probe imaging techniques with feedback control is limited by the dynamic response of the control loops. Performance criteria are the control loop bandwidth and the output signal noise power spectral density. Depending on the acceptable noise level, it may be necessary to reduce the sampling frequency below the bandwidth of the control loop. In this work, the frequency response of a vacuum Kelvin force microscope with amplitude detection (AM-KFM) using a digital signal processing (DSP) controller is characterized and optimized. Then, the main noise source and its impact on the output signal is identified. A discussion follows on how the system design can be optimized with respect to output noise. Furthermore, the interaction between Kelvin and distance control loop is studied, confirming the beneficial effect of KFM on topography artefact reduction in the frequency domain. The experimental procedure described here can be generalized to other systems and allows to locate the performance limitations.
Keywords
Related Topics
Physical Sciences and Engineering
Materials Science
Nanotechnology
Authors
H. Diesinger, D. Deresmes, J.-P. Nys, T. Mélin,