Article ID Journal Published Year Pages File Type
167939 Combustion and Flame 2008 15 Pages PDF
Abstract

Using hydrogen or carbon dioxide as an additive, we investigate the bending effect of turbulent burning velocities (ST/SLST/SL) over a wide range of turbulent intensities (u′/SLu′/SL) up to 40 for lean premixed methane combustion at various equivalence ratios (ϕ  ), where SLSL is the laminar burning velocity. Experiments are carried out in a cruciform burner, in which a sizable downward-propagating premixed CH4/diluent/air flame interacts with intense isotropic turbulence in the central region without influences of ignition and unwanted turbulence from walls. Simultaneous measurements using the pressure transducer and pairs of ion-probe sensors at various positions of the burner show that effects of gas velocities and pressure rise due to turbulent combustion on STST of lean CH4/H2/air flames can be neglected, confirming the accuracy of the STST data. Results with increasing hydrogen additions (δ=10δ=10, 20, and 30% in volume) show that the bending of ST/SLST/SL vs u′/SLu′/SL plots is diminished when compared to data with δ=0δ=0, revealing that high reactivity and diffusivity of hydrogen additives help the reaction zone remaining thin even at high u′/SLu′/SL. In contrast, the bending effect is strongly promoted when CO2 is added due to radiation heat losses. This leads to lower values of ST/SLST/SL at fixed u′/SLu′/SL and ϕ, where the slope n   can change signs from positive to negative at sufficiently large u′/SLu′/SL, suggesting that the reaction zone is no longer thin. All STST data with various δ   can be well approximated by a general correlation (ST−SL)/u′=0.17Da0.43(ST−SL)/u′=0.17Da0.43, covering both corrugated flamelet and distributed regimes with very small data scatter, where Da is the turbulent Damköhler number. These results are useful in better understanding how turbulence and diluents can influence the canonical structures of turbulent premixed flames and thus turbulent burning rates.

Related Topics
Physical Sciences and Engineering Chemical Engineering Chemical Engineering (General)
Authors
, , , , ,