Nanoscratch study of ZnO thin films deposited using radio frequency magnetron sputtering

In this study, a radio frequency magnetron sputtering system was used to deposit zinc oxide (ZnO) thin films onto langasite substrates. The thickness of the ZnO film increased from 0.3 to 1.2 μm upon increasing the deposition power from 100 to 200 W. The predominant growth orientation was along the c-axis (0 0 2); the intensities of the signals in the X-ray diffraction spectrum increased significantly upon increasing the film thickness. Scanning electron microscopy images revealed columnar structures in the ZnO films and the morphology of ZnO grains is found to be continuous and dense. It is attributed that oxygen chemisorbs on the target and cases a surface layer of adsorbed oxygen. We suggest that the more neutral ion bombardment on the growing film which induces the higher sputtering rate of the growing film. From in situ imaging of scratched tracks, measurement of the coefficient of friction was an effective means of detecting the occurrence of structural defects in the microstructures. We also found that the chemical compositions of ZnO films prepared under various deposition powers could be investigated using X-ray photoelectron spectroscopy.

► We evaluate the nanoscratch study of ZnO films using R.F. sputtering. ► The ZnO films became predominantly oriented along the c-axis (0 0 2). ► As deposition power increased, higher roughness and friction due to the occurrence of structural defects. ► We suggest more neutral ion bombardment on the film induces higher sputtering rate.