Article ID | Journal | Published Year | Pages | File Type |
---|---|---|---|---|
1683599 | Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms | 2010 | 5 Pages |
For combustion of organic samples, a closed tube-combustion (CTC) method is generally used, but this method requires much time and labor. The AMS facility at the Center for Chronological Research, Nagoya University, has established a CO2 production and purification system using an elemental analyzer (EA) connected to cryogenic traps. This system enables faster combustion and CO2 purification of samples than does the conventional CTC method. We compared measured carbon yields, δ13C values and 14C activities between EA and CTC samples of carbon standards of various sample quantities. This newly developed EA system had low background 14C activity due to sample preparation; the background activity was similar to that observed for the CTC method. The EA system also showed high precision and accuracy for δ13C and 14C measurements. The EA sample data obtained from conventional quantities (>1 mg carbon) of standards showed good agreement with the results obtained by the CTC method and with the consensus values, though background contamination was detected for samples containing <0.5 mg carbon. Oxalic acid standards containing <0.5 mg carbon that were analyzed by the CTC method tended to have widely varying values of carbon yield, δ13C and 14C activity, suggesting that the CO2 produced by combustion might have been prone to adsorption to an inner wall of the combustion tube, to CuO or to both, and that the CO2 produced in the CTC method might have decomposed.