Surface modification of stainless steel drills using plasma-immersion nitrogen ion implantation

Better protective and functional coatings on dental drills are increasingly demanded for their desired mechanical, tribological or chemical properties. We have studied the surface modification of steel dental drills, with an aim to increasing both their cutting life and corrosion resistance in dentistry using low-energy plasma-immersion nitrogen implantation over different temperature ranges. The temperature of the drills was controlled by varying the implantation voltage. Following implantation, tests showed that the microhardness of the nitrided drill surfaces was approximately one order higher than that of untreated drills and the corrosion tolerance was found to increase with growing temperature of the plasma-immersion process.