| Article ID | Journal | Published Year | Pages | File Type |
|---|---|---|---|---|
| 1690616 | Vacuum | 2012 | 6 Pages |
The low hardness and poor tribological performance of aluminum alloys restrict their engineering applications. However, protective hard films deposited on aluminum alloys are believed to be effective for overcoming their poor wear properties. In this paper, diamond-like carbon (DLC) films as hard protective film were deposited on 2024 aluminum alloy by arc ion plating. The dependence of the chemical state and microstructure of the films on substrate bias voltage was analyzed by X-ray photoelectron spectroscopy and Raman spectroscopy. The mechanical and tribological properties of the DLC films deposited on aluminum alloy were investigated by nanoindentation and ball-on-disk tribotester, respectively. The results show that the deposited DLC films were very well-adhered to the aluminum alloy substrate, with no cracks or delamination being observed. A maximum sp3 content of about 37% was obtained at −100 V substrate bias, resulting in a hardness of 30 GPa and elastic modulus of 280 GPa. Thus, the surface hardness and wear resistance of 2024 aluminum alloy can be significantly improved by applying a protective DLC film coating. The DLC-coated aluminum alloy showed a stable and relatively low friction coefficient, as well as narrower and shallower wear tracks in comparison with the uncoated aluminum alloy.
► Well-adhered DLC films were deposited on 2024 aluminum alloy by arc ion plating. ► sp3 content and mechanical properties of DLC films depends on pulse bias voltage. ► Wear resistance and surface hardness of 2024 Al alloy are improved by DLC coating. ► DLC-coated 2024 Al alloy exhibits low friction coefficient and shallow wear track.
