Article ID | Journal | Published Year | Pages | File Type |
---|---|---|---|---|
169105 | Combustion and Flame | 2013 | 10 Pages |
The enhancement of laminar flame development using microwave-assisted spark ignition has been investigated for methane–air mixtures at a range of initial pressures and equivalence ratios in a 1.45 l constant volume combustion chamber. Microwave enhancement was evaluated on the basis of several parameters including flame development time (FDT) (time for 0–10% of total net heat release), flame rise time (FRT) (time for 10–90% of total net heat release), total net heat release, flame kernel growth rate, flame kernel size, and ignitability limit extension. Compared to a capacitive discharge spark, microwave-assisted spark ignition extended the lean and rich ignition limits at all pressures investigated (1.08–7.22 bar). The addition of microwaves to a capacitive discharge spark reduced FDT and increased the flame kernel size for all equivalence ratios tested and resulted in increases in the spatial flame speed for sufficiently lean flames. Flame enhancement is believed to be caused by (1) a non-thermal chemical kinetic enhancement from energy deposition to free electrons in the flame front and (2) induced flame wrinkling from excitation of flame (plasma) instability. The enhancement of flame development by microwaves diminishes as the initial pressure of the mixture increases, with negligible flame enhancement observed above 3 bar.