Operating characteristics of the hollow anode glow discharge ion source

In this work, a new shape of a glow discharge ion source with axial extraction has been designed and constructed. High output ion beam current can be extracted axially in a direction normal to the discharge region without using extraction system. Optimization of the distance between the anode and the cathode has been determined using argon gas. It is found that the optimum gap distance between the anode and the cathode is equal to 3.5 mm, where stable discharge current and maximum output ion beam current can be obtained. The discharge characteristics of the ion source at different operating gas pressures have been measured at this optimum distance between the anode and the cathode. A disk of Teflon insulator has been put between the anode and the cathode. This disk was covering the cathode area and reducing the discharge area on the cathode surface for discharge confinement, therefore, a higher output ion beam current could be obtained.