| Article ID | Journal | Published Year | Pages | File Type |
|---|---|---|---|---|
| 1694376 | Applied Clay Science | 2015 | 9 Pages |
•A new polyamide containing imide groups with good solubility in organic solvents•Preparation of organo-modified Zn–Al LDH by one-step method•Effect of modified LDH on the properties of the newly synthesized polyamide•Improved thermal performance, flame retardancy and mechanical properties
A new series of polyamide/Zn–Al layered double hydroxide (LDH) nanocomposites (PANC) was prepared by solution intercalation technique under ambient condition in dimethylformamide as solvent. The polyamide (PA) containing pyridine ring and imide group was synthesized using direct polycondensation reaction with good solubility and desired molar mass. Organo-modified Zn–Al LDH (OLDH) was produced by one-step method and used to improve mechanical, thermal and flame properties of PA. The extent of dispersion of OLDH sheets was quantified by X-ray diffraction (XRD) and transmission electron microscopy (TEM) and the results showed a good dispersion for OLDH in the PA matrix. According to the results of mechanical tests, the tensile strength and the Young's modulus of PANC enhanced with increasing OLDH content. Thermal properties of PANC were studied by thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC). The thermal property results in both nitrogen and air atmospheres showed that the addition of OLDH resulted in a substantial increase in the thermal stability and char yields of PANC as compared to the neat PA. Significant improvements in flame retardancy performance were observed for PANC from microscale combustion calorimeter (MCC) (reducing both the heat release rate and the total heat released).
