Article ID | Journal | Published Year | Pages | File Type |
---|---|---|---|---|
1698364 | Procedia CIRP | 2016 | 4 Pages |
The paper investigates the thermal influences of CO2- and oil-cooling on the precision of a machine tool. If CO2 is used for process cooling instead of oil, a different temperature distribution in the machine is observed. Different temperature distributions lead to different tool center point (TCP)-displacements. To measure TCP-displacements under real process conditions with CO2 and oil, a special measurement setup is designed, built and applied. A representative process for the machine is chosen to compare the different process coolings. The results show that the choice of coolant has a crucial influence on the TCP-displacements. It is shown that the thermally induced displacements can be reduced by 15 μm in y-direction, but increase about 4 μm in x-direction, when the coolant is changed from oil to CO2.