Article ID | Journal | Published Year | Pages | File Type |
---|---|---|---|---|
1705921 | Applied Mathematical Modelling | 2010 | 22 Pages |
In this work, a detailed three-dimensional (3D) nonlinear finite element model is developed to study the response and predict the behavior of precast hybrid beam–column connection subjected to cyclic loads that was tested at the National Institute of Standards and Technology (NIST) laboratory. The precast joint is modeled using 3D solid elements and surface-to-surface contact elements between the beam/column faces and interface grout in the vicinity of the connection. The model takes into account the pre-tension effect in the post-tensioning strand and the nonlinear material behavior of concrete. The model response is compared with experimental test results and yielded good agreement at all stages of loading. Fracture of the mild-steel bars resulted in the failure of the connection. In order to predict this failure mode, stress and strain fields in the mild-steel bars at the beam–column interface were generated from the analyzed model. Such fields of stresses and strains are hard to measure in experimental testing. In addition, the magnitude of the force developed in the post-tensioning steel tendon was also monitored and it was observed that it did not yield during the entire loading history. Successful finite element modeling will provide a practical and economical tool to investigate the behavior of such connections.