Thermal postbuckling analysis of anisotropic laminated beams with tubular cross-section based on higher-order theory

•Thermal postbuckling analysis of anisotropic laminated tubular beams are presented.•Imperfection and temperature-dependent material properties are taken into account.•Refined higher-order shear deformation theory including nonlinearity is utilized.•A Galerkin׳s method is used to determine nonlinear characteristics.

Buckling of composite riser assumed beam structure is one of numerous engineering challenges in deep water pipeline design. Thermal postbuckling analysis of shear deformable anisotropic laminated composite beams with tubular cross-section subjected to uniform, linear and non-linear temperature distribution through the thickness resting on a two-parameter elastic foundation is presented. The material of each layer for the composite beam with tubular section is assumed to be linearly elastic and fiber-reinforced. The governing equations are introduced by using high-order shear deformation beam model with a von Kármán-type of kinematic nonlinearity. Composite beams with clamped–clamped, clamped–hinged, and hinged–hinged boundary conditions are considered. A numerical solution for nonlinear partial-integral differential form in terms of the transverse deflection by using Galerkin׳s method is employed to determine the buckling temperatures and postbuckling equilibrium paths of anisotropic laminated beams with different types of temperature distribution through the thickness. The numerical illustration concern the thermal postbuckling response of laminated beams with different types of boundary conditions, ply arrangements (lay-ups), geometric and physical properties. The results reveal that the geometric and physical properties, temperature dependent properties, initial geometry imperfection, boundary conditions and elastic foundation have a significant effect on thermal postbuckling behavior of anisotropic laminated composite tubular beams.