Article ID Journal Published Year Pages File Type
1727044 Ocean Engineering 2010 10 Pages PDF
Abstract
Dynamic and quasi-static models for analysis of a pipe lay spread are presented in the paper. Depending on the type of a pipe, spooling it on a big drum (reel) may cause plastic deformations. When the pipe is reeled out at sea, again it undergoes plastic deformations. In order to model such a nonlinear behaviour, a model, which includes both elasto-plastic material characteristics and large deformations, is required. Discretisation of the pipe is performed by means of the Rigid Finite Element Method (RFEM), which allows us to study static and dynamic problems, taking into account required properties of the model. Different sea conditions are simulated and analysed. It is shown how operational conditions can limit the ability of laying operation by a dedicated vessel, due to an unstable system response. The second part of the paper presents an upgrade of a passive reel drive by application of an active drive. In the model used for control applications, the pipe is modelled by a neural network. This allows us to perform a real-time calculations. In this fast-response calculation model, nonlinear aspects of the system are taken into account. The improvements in a pipe laying vessel performance are presented by some results of numerical simulations. The conclusions are also formulated.
Related Topics
Physical Sciences and Engineering Engineering Ocean Engineering
Authors
,