Article ID | Journal | Published Year | Pages | File Type |
---|---|---|---|---|
1727287 | Ocean Engineering | 2008 | 12 Pages |
Static stability mainly against sliding of a typical, relatively large skirted gravity structure was investigated using three-dimensional finite element modeling. The numerical model was validated against centrifuge test results. A specific set of dimensions was chosen to model a typical skirted gravity structure in a centrifuge with two types of foundation soils: uniform saturated sand and a clay zone sandwiched between two sand layers. Soil shear strength parameters used in the finite element models were estimated from in-flight cone penetration resistance measurements obtained in the centrifuge. Numerical parametric studies were conducted using the validated finite element model. The parameters included were the depth and strength of the clay zone and the inclination of external load. It is shown that a relatively simple three-dimensional finite element model was effective in providing information that would be needed to design such a critical and expensive offshore structure. Basic Mohr–Coulomb strength parameters and moduli based on cone penetration resistance measurements and published empirical correlations were appropriate in modeling the soils in the finite element simulations.