| Article ID | Journal | Published Year | Pages | File Type |
|---|---|---|---|---|
| 1733579 | Energy | 2012 | 9 Pages |
In this paper, the entropy generation due to flow and heat transfer of nanofluids between Co-rotating cylinders with constant heat flux on the walls is studied, analytically. The governing equations in cylindrical coordinates are simplified and solved to find the effect of using nanofluids with different volume fractions on the entropy generation rate in the annulus. The results are presented at various values of Brinkman number (Br), velocity ratio (λ), radius ratio (Π), heat flux on the inner cylinder (Q0), and a parameter (Ψ) which determines the contribution of the fluid friction in the overall entropy generation. The analysis has been done mainly using Al2O3–EG nanofluid, though some comparisons with TiO2–Water nanofluid are made. The thermophysical properties of nanofluids are calculated using the available relations based on experimental data. From the average entropy generation viewpoint, at different conditions, an optimum volume fraction of nanoparticles is obtained in which the average entropy generation is minimized. Finally, some comparisons between the effects of using Al2O3–EG, and TiO2–Water nanofluids are made. The results show that TiO2–Water nanofluid is more suitable than Al2O3–EG nanofluid to use as the working fluid at low Brinkman numbers.
► Second law between two isoflux rotating cylinders is investigated using two nanofluids including Al2O3–EG and TiO2–Water. ► Results show that adding nanoparticles reduces entropy generation when the irreversibility due to heat transfer is dominant. ► Optimum volume fraction of nanoparticles at which the entropy generation is minimized in different conditions is obtained. ► Results reveal that using TiO2–Water nanofluid is more helpful than Al2O3–EG nanofluid at low Brinkman numbers.
