| Article ID | Journal | Published Year | Pages | File Type |
|---|---|---|---|---|
| 1734064 | Energy | 2011 | 14 Pages |
A simple approach is presented for the modeling of complex oscillatory thermal-fluid systems capable of converting low grade heat into useful work. This approach is applied to the NIFTE, a novel low temperature difference heat utilization technology currently under development. Starting from a first-order linear dynamic model of the NIFTE that consists of a network of interconnected spatially lumped components, the effects of various device parameters (geometric and other) on the thermodynamic efficiencies of the device are investigated parametrically. Critical components are highlighted that require careful design for the optimization of the device, namely the feedback valve, the power cylinder, the adiabatic volume and the thermal resistance in the heat exchangers. An efficient NIFTE design would feature a lower feedback valve resistance, with a shorter connection length and larger connection diameter; a smaller diameter but taller power cylinder; a larger (time-mean) combined vapor volume at the top part of the device; as well as improved heat transfer behavior (i.e. reduced thermal resistance) in the hot and cold heat exchanger blocks. These modifications have the potential of increasing the relevant form of the second law efficiency of the device by 50% points, corresponding to a 3.8% point increase in thermal efficiency.
► We model a two-phase low grade heat conversion fluid pumping technology. ► The model consists of a network of first-order linear spatially lumped components. ► An open feedback valve & smaller diameter/taller power cylinder increase efficiency. ► A larger vapor volume & improved heat exchangers increase efficiency. ► These modifications can increase the thermal/exergetic efficiency by 3.8%/50%.
