Article ID | Journal | Published Year | Pages | File Type |
---|---|---|---|---|
1741682 | Progress in Nuclear Energy | 2008 | 6 Pages |
A new solid polymer electrolyte water electrolysis system was constructed using an original proton exchange membrane (PEM). The highly proton-conductive PEM was prepared by the γ-ray-induced post-grafting of styrene into a crosslinked-polytetrafluoroethylene (PTFE) film and subsequent sulfonation. The water vapor to be electrolyzed was controlled at a constant relative humidity and introduced into the cell at different temperatures up to 80 °C. As the cell voltage was increased, the current became higher; the maximum current was 50 mA/cm2 at 2.5 V at a temperature of 80 °C, corresponding to a hydrogen production rate of 0.38 mL/min cm2 in the normal state (25 °C, 1 atm). The voltage–current characteristics were analyzed with a theoretical model based on Butler–Volmer kinetics for electrodes and transport resistance through the PEM. This analysis revealed that the anode exchange current density and interfacial resistance determined the electrolysis performance.