Identifying the Inertial Cavitation Threshold and Skull Effects in a Vessel Phantom Using Focused Ultrasound and Microbubbles

Focused ultrasound (FUS) in combination with microbubbles has been shown capable of delivering large molecules to the brain parenchyma through opening of the blood-brain barrier (BBB). However, the mechanism behind the opening remains unknown. To investigate the pressure threshold for inertial cavitation of preformed microbubbles during sonication, passive cavitation detection in conjunction with B-mode imaging was used. A cerebral vessel was simulated by generating a cylindrical hole of 610 μm in diameter inside a polyacrylamide gel and saturating its volume with microbubbles. Definity microbubbles (Mean diameter range: 1.1-3.3 μm, Lantheus Medical Imaging, N. Billerica, MA, USA) were injected prior to sonication (frequency: 1.525 MHz; pulse length: 100 cycles; PRF: 10 Hz; sonication duration: 2 s) through an excised mouse skull. The acoustic emissions due to the cavitation response were passively detected using a cylindrically focused hydrophone, confocal with the FUS transducer and a linear-array transducer with the field of view perpendicular to the FUS beam. The broadband spectral response acquired at the passive cavitation detector (PCD) and the B-mode images identified the occurrence and location of the inertial cavitation, respectively. Findings indicated that the peak-rarefactional pressure threshold was approximately equal to 0.45 MPa, with or without the skull present. Mouse skulls did not affect the threshold of inertial cavitation but resulted in a lower inertial cavitation dose. The broadband response could be captured through the murine skull, so the same PCD set-up can be used in future in vivo applications. (E-mail: ek2191@columbia.edu)