Article ID | Journal | Published Year | Pages | File Type |
---|---|---|---|---|
1765942 | Advances in Space Research | 2010 | 10 Pages |
The nanosatellite UNICubeSAT is described, carrying a Broglio Drag Balance Instrument for neutral thermosphere density in situ measurements. The aim of the mission is to contribute to the development of accurate thermosphere models, achieving in situ, real time measurements of atmosphere density, that could be exploited for global atmosphere model validation and accurate short term (1–3 days) real time space weather forecasts. The satellite is inexpensive and swarms could be easily launched operating as a distributed sensor network to get simultaneous in situ local (not orbit averaged) measurements in multiple positions and orbit heights. The nanosatellite is based on the Cubesat standard architecture, weighing about 1 kg for 1-L volume. Atmospheric drag force is measured by the displacement of light plates exposed to the incoming particle flux seen by the spacecraft, applying the original three dimensional Broglio Drag Balance concept to a single nanosatellite axis. The instrument concept and its relation to the satellite bus is depicted, showing that many long term potential measurement error sources and biases can be removed in data processing if the spacecraft is spin stabilized. The expected accuracy in density measurements is 20%. The instrument cost is a fraction of that of accurate accelerometers. The onboard systems are based on commercial off the shelf components, in accordance with the short lifetime typical of aeronomy satellites.