Article ID | Journal | Published Year | Pages | File Type |
---|---|---|---|---|
1784601 | Infrared Physics & Technology | 2011 | 4 Pages |
We report on the temperature dependent lasing characteristics of InAs/GaAs quantum dot lasers under continuous wave mode. The five-stacked InAs quantum dots were grown by gas-source molecular beam epitaxy with slightly different thickness. Ridge waveguide laser with stripe width of 6 μm was processed on the growth structure. The characteristic temperature was measured as high as infinity in the temperature range of 80–180 k. With the increase of injection current, the lasing spectra of laser diode broaden gradually at low temperature of 80 k. However, when the operation temperature increases from 80 to 300 K, the width of lasing spectrum reduces gradually from 40 to 2.0 nm. The lasing process is obviously different from that of a reference quantum well laser which widens its width of lasing spectra by increasing operation temperature. These experiments demonstrate that a carrier transfer from the smaller size of dots into larger dots caused by thermal effect play an important role in the lasing characteristic of quantum dot lasers. In addition, the laser can operate at maximum temperature of 80 °C under continuous wave mode with a maximum output power of 52 mW from one facet at 20 °C. A wavelength thermal coefficient of 0.196 nm/K is obtained, which is 2.8 times lower than that of QW laser. The low wavelength thermal coefficient of quantum dot laser is mainly attributed to its broad gain profile and state filling effects.
► The temperature dependent characteristics of InAs/GaAs QD laser are carefully investigated. ► The lasing process of QD laser is obviously different from that of a quantum well laser. ► The physics origin of carriers’ redistribution in QDs caused by temperature is discussed. ► A good wavelength thermal coefficient is obtained, which is 2.8 times lower than that of QW laser.