| Article ID | Journal | Published Year | Pages | File Type |
|---|---|---|---|---|
| 1797837 | Journal of Magnetism and Magnetic Materials | 2016 | 5 Pages |
•Impedance and its components of amorphous Co75Fe5Si4B16 ribbons were studied.•MI sensitivity to the magnetic field depends on a temperature and a deforming force.•Polymer covering can affect the functional properties of the composite.
The combined influence of the temperature, the elastic tensile stress and the external magnetic field on the total impedance and impedance components were studied for rapidly quenched amorphous Co75Fe5Si4B16 ribbons. Both as-cast amorphous ribbons and Co75Fe5Si4B16/polymer amorphous ribbon based composites were considered. Following polymer coverings were studied: modified rubber solution in o-xylene, solution of butyl methacrylate and methacrylic acid copolymer in isopropanol and solution of polymethylphenylsiloxane resin in toluene. All selected composites showed very good adhesion of the coverings and allowed to provide temperature measurements from 163 K up to 383 K under the applied deforming tensile force up to 30 N. The dependence of the modulus of the impedance and its components on the external magnetic field was influenced by the elastic tensile stresses and was affected by the temperature of the samples. It was shown that maximal sensitivity of the impedance and its components to the external magnetic field was observed at minimal temperature and maximal deforming force depended on the frequency of an alternating current.
