Fabrication of MgO barrier for a magnetic tunnel junction in as-deposited state using amorphous RE–TM alloy

MgO (1 0 0) textured films on Fe buffer layer with (1 0 0) preferential orientation were prepared by a reactive facing targets sputtering system at a substrate temperature of 100 °C during MgO deposition. This process can allow fabrication of MgO (1 0 0) tunneling barrier layer without high-temperature annealing process after the sputter-deposition. In addition, FeCo (1 0 0) preferred orientation films prepared on GdFeCo layers were improved with GdFeCo thickness. MgO films deposited on Fe (or FeCo) buffer layers revealed apparent (1 0 0) preferred orientation at the early stage of the film growth. 3 nm-thick MgO films deposited on GdFeCo [100 nm]/Fe [3 nm] exhibited (1 0 0) texture. Magnetic characteristic of perpendicular-magnetic tunnel junction (P-MTJ) element with the structure of GdFeCo [100 nm]/Fe [3 nm]/MgO [3 nm]/Fe [3 nm]/TbFeCo [100 nm] exhibited high squareness ratio of 0.8 and coercivity of free layer as low as 117 Oe by anomalous Hall effect, and (1 0 0) preferred orientation of 3 nm-thick MgO layer was observed by an X-ray diffractometer.