Microstructural and magnetic properties of CoPt nanowires

In this work, the magnetic and microstructural properties of CoPt nanowires are presented as a function of the electrolyte pH and current density during electrodeposition into anodized alumina templates. CoPt nanowires of high aspect ratio have been prepared using electrolyte pH values in the range from 2 to 6. The as-made samples exhibit a face centered cubic (fcc) structure with soft magnetic properties which transform into the face centered tetragonal (fct) L10 phase after thermal treatment. Different pH values of the electrolyte during electrodeposition lead to significantly different microstructures and, therefore, different magnetic properties. The CoPt nanowires prepared at high pH value are composed of fcc nanorods of about 25 nm in length. Thermal annealing of these samples leads to a preferred (0 0 1) orientation (along the direction perpendicular to the direction of nanowires) which increases with annealing time. On the other hand, the CoPt nanowires prepared at lower pH value are composed of uniform fcc nanograins with the size ∼2−3 nm. Magnetization curves for the later sample are virtually identical in both directions indicating an isotropic behavior.