The effect of structure on magnetic properties of Co nanowire arrays

Co nanowire arrays with three typical diameters of 20, 50 and 120 nm have been fabricated into anodic alumina oxide templates using an ac electrodeposition method. It is found that the crystal texture of the Co nanowires depends on the pH value of the deposition electrolyte. X-ray diffraction results show that the (1 0 0) texture appears at pH 6.2, while the diffraction peaks of (1 0 0) and (1 0 1) appear at pH 6.4 with the diameter of 20 nm. In addition, the (0 0 2), (1 0 0) and (1 0 1) peaks appear with an increase of pH value for the nanowire arrays with diameters of 50 and 120 nm, respectively. Magnetic measurements indicate the effect of structure on the magnetic properties of the nanowire arrays, which depend strongly on the different diffraction peaks, as adjusted by the pH value.