Determination of silicone coating Young's modulus using atomic force microscopy

The polymerisation degree of thin polymer coatings was checked by following the variation of their local mechanical properties. Atomic force microscope (AFM) was used in an indentation mode to investigate the mechanical characteristics of silicone coatings on polycarbonate substrates. The evolution of Young's modulus of the silicone coatings was determined as a function of the polymer annealing time. We have used a relative method to measure Young's moduli, which involves a calibration step with a set of reference polymers. No variation was observed for the modulus of silicone coatings annealed during more than 40 min at 130 °C. This result indicates that over-heating does not modify the mechanical properties of the coating.