Reducing thermal noise in future gravitational wave detectors by employing Khalili etalons

Reduction of thermal noise in dielectric mirror coatings is a key issue for the sensitivity improvement in the second and third generation interferometric gravitational wave detectors. Replacing an end mirror of the interferometer by an anti-resonant cavity (a so-called Khalili cavity) has been proposed to realize the reduction of the overall thermal noise level. In this article we show that the use of a Khalili etalon, which requires less hardware than a Khalili cavity, yields still a significant reduction of thermal noise. We identify the optimum distribution of coating layers on the front and rear surfaces of the etalon and compare the total noise budget with a conventional mirror. In addition we briefly discuss advantages and disadvantages of the Khalili etalon compared with the Khalili cavity in terms of technical aspects, such as interferometric length control and thermal lensing.

► Khalili etalon yields a significant reduction of thermal noise. ► Khalili etalon and Khalili cavity advantages and disadvantages in are discussed. ► Khalili etalon optimal coating configuration is identified. ► Khalili etalon and conventional mirror thermal noises budgets are compared.