Fabrication of DLC films by pulsed ion beam ablation in a dense plasma focus device

The pulsed intense ion beam, emitted from a dense plasma focus (DPF) discharges performed with hydrogen gas, has been used to ablate the graphite target depositing diamond-like carbon (DLC) films on Si substrates. The substrates were mounted on a holder, which allowed for deposition at positions between normal and 20° off-normal to the target. The samples were removed for analysis after 10 and 20 shots. Nano-particles were observed in the films by a field-emission scanning electron microscope. Raman spectra indicate that sample deposited at 20° off-normal with 20 shots possesses the highest sp3 content among the samples. The film deposited at this position was also found has the highest hardness.