Article ID | Journal | Published Year | Pages | File Type |
---|---|---|---|---|
1877102 | Applied Radiation and Isotopes | 2008 | 8 Pages |
The determination of Pu isotopes in lake sediments is important for many studies, such as Pu pollution source identification, sediment mixing estimation, erosion evaluation and establishment of deposition chronology in lakes. In this paper, a simple analytical method using sector field inductively coupled plasma mass spectrometry (ICP-MS) combined with two-stage chromatographic separation and purification of Pu was developed based on the optimization and adaptation of the previously published method for marine samples with an emphasis on the study of the elimination of interferences for the analysis of freshwater lake sediments. A strong base anion-exchange resin (AG MP-1M) was used to purify Pu isotopes with concentrated HBr as the final eluent for Pu elution. The chemical yields were ca. 64% and the decontamination factor for U was ca. 105. The developed method was validated using a freshwater lake sediment reference material (SRM-4354) and a marine sediment reference material (IAEA-368), and applied to the determination of Pu isotopes in sediment samples of Lake Poyang, East China. For the analysis of certified reference materials, both 239+240Pu activity of 31.6 mBq g−1 and 240Pu/239Pu atom ratio of 0.033 for IAEA-368 were comparable to the certified value and/or literature values. As for SRM-4354, 239+240Pu activity of 3.90 mBq g−1 agreed well with the certified value. However, the mean 240Pu/239Pu atom ratio of 0.144 was lower than those reported by other laboratories. This difference suggested that this material may be isotopically inhomogeneous. 240Pu/239Pu atom ratios of Poyang Lake sediment samples ranged from 0.185 to 0.192 with a mean value of 0.187±0.004, indicating that plutonium pollution originated from global fallout.