Gamma spectrometric measurements of depth-related radionuclide distribution in walls

The method for depth-related radionuclide distribution was evolved for approximate determination of the spatial lay-out of radionuclides in materials. The method is based on different attenuation coefficients for various energies of gamma radiation. For each material, the attenuation coefficient decreases with rising energy of radiation. It is therefore possible to assess the location of radionuclides in a material owing to attenuation on the track which a photon has to pass through the material. In this case, gamma lines with energies 609 and 1764 keV produced by nuclide 214Bi were used for depth-related radionuclide distribution. This application should be suitable for locating radionuclides in the walls of buildings where high dose rates from gamma radiation occur. These doses are caused by natural radionuclides, mainly radium daughters. The presence of radionuclides in houses poses a high risk associated with inhalation of radon and its decay products. For suitable remediation, it is necessary to know the radionuclide depth distribution.