| Article ID | Journal | Published Year | Pages | File Type |
|---|---|---|---|---|
| 1883893 | Radiation Measurements | 2013 | 6 Pages |
A new methodology has been developed to measure 220Rn (thoron) emission from 224Ra-bearing powders handled in nuclear fuel cycle. In this method, a ‘powder sandwich’ is made by enclosing the powder in between two filter papers in sandwich geometry. This arrangement ensures that the thickness of powder sample is much less than the thoron diffusion length, avoiding any loss of thoron due to matrix absorption and supports complete removal of thoron gas emanated from the powder. The technique utilizes a closed loop setup in which thoron emanated from the powder sandwich is removed using flow through arrangement and is measured using suitable thoron detector. The thoron mass exhalation rate for the powder is estimated using a mass balance model from the measured equilibrium thoron concentration. Subsequently, the thoron emanation coefficient is estimated using the thoron mass exhalation rate and 224Ra content of the powders. The applicability of the methodology has been demonstrated for three different powders.
► A new method is developed to measure 220Rn emission from powder sources. ► The method employ powder sandwich arrangement for sample preparation. ► The method ensures minimum loss of thoron despite its short half life (55.6 s). ► Applicability of the method has been verified by performing actual measurements.
